Symphonic Remote Codes
Looking for Symphonic Remote Codes, well you just found all the codes you'll ever need! We have codes for your Symphonic Remote Controls, as well as codes for all of your Symphonic devices such as TV and VCRs. But, before you can make use of these codes you'll need an idea of how to program them.
Symphonic/Emerson Programming Guide
First thing you will need to do before programming you Symphonic remote control and other devices, is to have the remote codes ready! Once you acquire the codes programming the Symphonic remote control and other devices will be a breeze!
Step 1: Turn on your Device you wish to program.
Step 2: Press and hold the Device Button on the Symphonic Remote Control that matches the device that you have just turn on. (for example: if you have just turned on your TV, than you would select the TV button on your remote control.) Hold the device button down until you see a flashing light, or lights, on the remote control.
Step 3: While pointing the remote towards the device your programming, enter the three, four, or five digit code on the remote controls numbered key pad.
Step 4: Press the Power button on the symphonic remote to save the code. If the code was correct the device you turned on should turn OFF. If the device shut off than your finished programming your remote control. If it did not turn off than repeat the steps until the device turns off or you have exhausted all of the codes.
Below is a list of codes for Symphonic Remote controls and other devices:
